• Display Centre Legend SHOWROOMS Products on Display Show Home Show details

    Display Centre Legend

    Choose the type of PDL experience that suits your needs - whether you're planning a major renovation or building your dream home, we've got the answer to your home electrical questions.

    Tier Premium Products Dedicated Area Dedicated Staff Full Product Range Installed
    SHOWROOMS
    Products on Display
    Show Home
    Tier
    Premium Products
    Dedicated Area
    Dedicated Staff
    Full Product Range
    Installed

    SHOWROOMS

    See, touch and experience our full range of solutions at our Vision Studio Showrooms, including home automation. Dedicated staff on hand to provide guidance and ideas.

    Bookings by appointment.

    Products on Display

    Here you will find PDL by Schneider Electric product displays that are located in our partners’ showrooms.

    Some locations will be open on the weekend, please check before visiting.

    Show Home

    Here you will be able to see PDL by Schneider Electric products on display in the home, wired up and operational.

    Some locations will be open on the weekend, please check before visiting.

  • Close Map

In location

I'm looking for

Wholesalers
EXPERTISE
  • Expand

Display Centre IconVisit a PDL Vision Studio showroom for the full home electrical solution experience.

Product stock may vary at each display location, please check before visiting.

    Load More Load Complete
    Change Location

    01 Overview

    No more stumbling in the dark, or reaching for that awkwardly positioned light switch

    Combining a smart coating with a smart controller you can activate lighting using different touch commands. The smart coating is covered by a normal Resene topcoat, or even wallpaper. Simply double tap the active part of the wall to switch the lighting on and off.

    #ReseneSmartTouch

    When you combine the Resene SmartTouch Conductive Coating with a Resene SmartTouch Controller you can turn your wall into a light switch. Here are the main components that combine for a finished result:

    FeaturesBenefits
    Resene SmartTouch Conductive Coating The conductive coating creates an active area where touches will be sensed. A black coating that is applied to a surface area that is 2m square max. Normal Resene decorative topcoats are applied over this.
    Resene SmartTouch Controller An electronic switch that allows touch commands to activate lighting. Can switch one or two sets of lights (loads) off one controller. Located behind the light switch, or in the ceiling or wall cavity in an appropriate electrical enclosure.
    Resene Smartlink Connects the active area of the Resene SmartTouch Conductive Coating with the Resene SmartTouch Controller. Located behind the light switch plate, or behind a moulding/architrave, or beneath the plaster board.
    Decorative topcoat Decorative layers such as Resene paint or wallpaper can be applied over the Resene SmartTouch Conductive Coating so your room is finished in your preferred Resene colour or style.
    Resene SpaceCote It’s recommended that Resene SpaceCote is applied as a topcoat for an easy clean surface.

    Touch-activated electronic light switch when connected with Resene SmartTouch Conductive Coating.

    FeaturesBenefits
    Lighting control Switches on/off one or two sets (loads) of lights. Control them separately or together via touch commands.
    Touch commands Works ‘out of the box’ with pre-set commands. Typically ‘double-tap’ for the first load, and ‘triple-tap’ for the second load, and ‘tap and press’ for both loads together.
    Discrete installation Typically the controller is located behind the light switch, or in the ceiling or wall cavity in an appropriate electrical enclosure.
    No light switch Often for ease of installation and location for system maintenance the controller is located behind a switch plate, but there is no requirement for a light switch, so it can be located in the ceiling or wall cavity in an appropriate electrical enclosure.
    Bluetooth Low Energy Paint two sides of a room, even where there are no cables for lights*. Two controllers can be connected via Bluetooth, enabling two surfaces to activate a set of lights where the 2nd surface isn’t directly connected to the lights. *Note the second unit does have to be powered up to work.
    Built-in Timer Have your lights time-out automatically after a set period. Handy for hall ways, entrance-ways, and more.

    03 Features

    DETAILS
    • Resene SmartTouch Range
      • Resene SmartTouch S1 Controller

        Touch-activated electronic light switch when connected with Resene SmartTouch Conductive Coating.

        Read More

        Resene SmartTouch S1 Controller

        Touch-activated electronic light switch when connected with Resene SmartTouch Conductive Coating.

        An electronic switch that allows touch commands to activate lighting. Can switch one or two sets of lights (loads) with one controller. Located behind the light switch, or in the ceiling or wall cavity in an appropriate electrical enclosure.

        - Ratings 240V a.c., 8A per channel, 10A combined, 1000W LED

        - Timer: 1 min to 4 hours

        - Dimensions: 75(h)x 54(w) x 26(d) mm

        - Set-up via Resene SmartTouch installation app

      • Resene SmartLink Connector Cable

        Connects the active area of the Resene SmartTouch Conductive Coating with the Resene SmartTouch Controller.

        Read More

        Resene SmartLink Connector Cable

        Connects the active area of the Resene SmartTouch Conductive Coating with the Resene SmartTouch Controller.

        Located behind the light switch plate, or behind a moulding/ architrave, or beneath the plaster board.

        - Installed by painter during Resene SmartTouch Conductive Coating application

        - Use Smartlink application templates for PDL Iconic and PDL 600 Series

        - Follow design rules for Resene SmartTouch Condutive Coating and the Smartlink installation - refer to resene.co.nz/smarttouch for more information

        - Sold separately with Resene SmartTouch Conductive Coating via Resene's distribution network

      • Resene SmartTouch Conductive Coating

        Resene SmartTouch conductive coating creates an active area where touches will be sensed.

        Read More

        Resene SmartTouch Conductive Coating

        Resene SmartTouch conductive coating creates an active area where touches will be sensed.

        A black coating that is applied to a surface area that is 2m2 max. Normal decorative Resene topcoats or wallpaper is applied over this.

        - Application by the painter following preparation and primer.

        - Follow design rules and installation procedure, being careful to adhere to minimum electrical clearances. For more information refer to www.resene.co.nz/smarttouch

        - Sold separately via Resene's distribution network

      • Resene SmartTouch Installation App

        The Resene SmartTouch system is designed to operate straightaway once installed via default settings. The app has a set-up guide to assist with making changes.

        Read More

        Resene SmartTouch Installation App

        The Resene SmartTouch system is designed to operate straightaway once installed via default settings. The app has a set-up guide to assist with making changes.

        Configure the Resene SmartTouch S1 Controller for larger active areas, changing default operation modes, and access to addition features.

        - Available for iOS and Android

        - Change default touch commands

        - Adjust sensitivity

        - Connect up to 2 controllers via Bluetooth Low Energy

      04 Video

      • Resene SmartTouch